Latest Hightorque fuselage - for Bell UH-1C size 600 helicopters

[Helibuddy]

Introducing the Hightorque Bell UH-1C (Huey) fuselage for 600 size helicopters

This fuselage is suitable for most 600 size helicopters, including :

Caliber 3 & 3D, Hurricane 550, Logo 20, Nexus 30, Nexus 46, Raptor 30, Shuttle Z, Shuttle OS32, Shuttle EVO 50, Shuttle Plus2 30, Shuttle Sceadu EVO 30, Shuttle SWM 50, Shuttle Plus 2, T-rex 600.

To check if your model is suitable for this fuselage, check the distance between the main rotor shaft and the tail rotor shaft. If the distance is approximately 800mm (31.5inches) the fuselage can be adapted to fit.


The main fuselage parts are shown in the following photograph.




Material: 1 mm Pet-g.

Also included are a set of plywood baseplates for the mounting of the helicopter mechanism, and plywood bulkheads and ribs to add rigidity to the fuselage.

Nose section is made removable for battery changes or maintainence.

Partially built



The completed helicopter




We also offer the following tail link to move the rotor up to the tip of the tail fin.

It is not included in the price of the Fuselage Kit.

This tail link is only suitable for helicopters with a belt driven tail rotor.




Check our other listings under tail links for this item.

Assembly instructions only in English at present

Links to 600 size items:

USA

http://www.shop-usa.high-torque.com/index.php?cat=c100501_Fuselages-600-size-Helicopter.html

UK

http://www.shop-uk.high-torque.com/index.php?cat=c100501_Fuselages-600-size-Helicopter.html

email: hightorquemail@aol.com